Automated Friction "Pinch" testing of Hydrophilic Coatings on Catheters






These days angioplasty, is an endovascular procedure to widen narrowed or obstructed arteries or veins, is almost considered a routine procedure, yet the technology behind it is exacting and subject to rigorous quality and performance control. In this procedure an empty, collapsed balloon, known as a balloon catheter, is passed over a wire into the narrowed locations and then inflated to a fixed size. The balloon forces expansion of the narrowing within the artery or vein and the surrounding muscular wall, opening up the blood vessel for improved flow, and the balloon is then deflated and withdrawn. A stent may, or may not, be inserted at the time of ballooning to ensure the vessel remains open.

Not only are the stents themselves, and the wire used in their construction, tested for tensile strength, compressive strength and stiffness properties, so too are the balloon catheters used to deliver the stent into the body. In recent times, more attention is being paid to the frictional properties of the hydrophilic coating of the catheter’s outer surface must be qualified, known and controlled. At Tinius Olsen we have developed a test system which accurately measures, and records, the frictional forces developed between the catheter and a known surface finish applied at a given and controlled “Pinch” force. The pinch force and surface finish provide the known parameters for each test, so any variation in the measured friction forces is derived from the variation in the catheter surface. 

The test is a cyclic test where the catheter specimen is repeatedly subjected to the pinch force against the known surface finish as shown in the VIDEO CLIP  Click Here . The test is conducted within a saline solution environment which is heated to, and maintained at, body temperature. 

The output from the Tinius Olsen system includes specific results; friction force, time, and the position of the catheter as its cycles through the test process. It also produces test graphs that show the catheter’s performance. It is these results and graphs which qualify the quality and capability of the catheter’s surface coating.



Tinius Olsen systems can be configured to test the mechanical quality and performance of a wide range of medical devices subjecting them to tensile, compression, bending, shear, torsional, impact and hardness tests.

Comments

Popular posts from this blog

Grip Jaw Face Solution for Tensile Specimens Cut from Pipe

Tinius Olsen Universal Testing Machine