Posts

Showing posts from July, 2012

Platens for Foam Test

Image
Continuous improvements by Tinius Olsen engineers have made testing foams easier & effective. Flexible cellular materials, including slab, bonded & molded urethane foams, can be tested using Tinius Olsen’s material testing machines & Horizon software. The redesigned platens ensure that air from inside the foam specimen is allowed to escape, by including “air relief” holes; without these holes the trapped air can create back pressure and erroneously increase the indicated compressive strength. These platens are designed in accordance with ASTM D3574.

Testing Plastic Bottle Caps

Image
Plastic bottles have found increasingly wide application in the food and beverage industries nowadays, with plastic bottles in all shapes and sizes for soft drinks, juices and water found everywhere in our daily life. Along with their wider application and acceptance are more, and stricter, requirements for quality and safety control and testing. One such test is the p ull-off strength of plastic bottle caps where the force required to pull the bottle cap off the bottle is routinely checked and monitored by manufacturers. These manufacturers commonly use a Tinius Olsen tensile tester to take these measurements. In these cases, Tinius Olsen recommends the use of the grip attachment model S540, which comprises of two parts; the lower bottle cap holder and the upper cap “Pull off” attachment. Operators simply insert the cap in the lower attachment, lower the upper attachment onto the cap and start the tensile test; at the end of the test, the testing machine reports the “Pull Off forc

3 point Bend test for Dental Filling Materials

Image
Tinius Olsen engineers have continued their efforts to help the dental industry with another innovative grip design, this time it is a small 3 point bend test attachment used for filling materials. In this test, the specimen is supported on two lower points of contacts while the flexural, or bending, force is applied by the third, upper, point of contact. This is Tinius Olsen attachment part no. 360-001 and is typically used with a Tinius Olsen electromechanical tension / compression testing machine & is compliant with ISO 4049:2000 Key specifications of the attachments are: The lower two points of contact have a span of 20mm. Each point of contact (upper and lower) is   comprise of a 2mm diameter roller. Typical maximum forces expected is 1kN (100 kgf/220 lbf).

High Temperature Extensometer

Image
This High Temperature Extensometer is a rugged strain gauge based extensometer and is designed for strain and elongation measurements in material testing. The extensometer mounts directly to the furnace via a water cooled bracket , while the alpha grade silicon carbide arms contact the sample. The extensometer features quick release water cooling lines, a gauge length setting tool, and full Wheatstone bridge principle of operation which allows it to operate at temperatures of up to 1200 o C

Special Dental Test Attachments

Image
Tinius Olsen makes its mark in the Dental Industry by manufacturing special  test attachments which are used for a variety of tests including the adhesive strength of braces on teeth, the tensile strength of a composite tooth post, to name just a couple.   Other test which can be carried out using the test machine include regular tensile, shear, bond strength (tensile and shear), flex bend, peel, compression and puncture .