Posts

Showing posts from October, 2007

Need testing advice??

I'm afraid that I've brought a bit of a bug to Tinius Olsen... Everyone seems to be developing blogs. (I think you can get a cream for it from a good pharmacist). If you want to learn about testing plastics, try this. http://www.testingplastics.com/ If you'd like to learn about testing metals, try this. http://www.testingmetal.com/ If you are a student looking for testing advice or examples try this. http://www.schooloftesting.com/ And of course testing textiles can be found here... http://www.testingtextiles.com/ Harry, Earl, David and Sylvia are all specialists in their specific areas and are happy to help... The question and answers section is very informative.

S0991 Carton Bend Test

Image
This a ttachment , the S0991 is designed to test how card and paper folds, a small sample section is taken and placed under a retaining bar, this is then forced to fold using the fold bar at the back. A rotary digital encoder measures the rotation angle and compares it to the force measured on the loadcell . To ensure self-alignment cord is used to rotate the pulleys that move the folding bar. Used in the packaging industry this compares how easy is is to open your box of cereal in the morning and to see how strong the folds are...

160-002 - BS4370-2:1993 - Tensile Test Rigid Cellular Materials

Image
BS4370-2:1993 Method 9 tests the tensile strength of rigid Cellular Material. This encompasses things like ridged foams used for padding and floatation devices. Method nine calls for two different profiles of the sample material to be cut. To save on having two different rigs, this one device can accept both sizes of sample. it also has interchangeable and modular test face profiles.

106-001 - Self-Aligining Fixture

Image
It's sometimes necessary to attach a grip or fitting that has no way of self aligning , in these cases we've developed several ingenious ways to add this function to the machines. One of these methods is to use a Self- Aligning Fixture like the one shown in the picture. As it is designed to fit a 150 kN U-Series machine it is somewhat massive. The top thread being 1" UNF in diameter and the bottom an M33. It weighs, a not insignificant , 7kg; has a 110mm body diameter and is nearly a foot tall. The central pin that you can see has is supported by a Nitrile block which allows it to float, whilst absorbing the shock of a sample failure.