Posts

Showing posts from July, 2007

760-001 - ASTM D429-03 - Double Shear Adhesion Jig

Image
The ASTM D429-03 69.1 (Method G) is for testing the adhesion properties of rubber. The rubber is pre-formed onto 3 metal plugs. this gives a double rubber sandwich that can then be tested. This attachment holds the metal components of the sandwich and allows a double shear test to be performed.

123-001 - 250mm Textile Grip

Image
A range of faces make the 123-001 Textile Grip an adaptable and very useful attachment. Textiles can be a very hard materials to test, they can be very strong in tension, and unless ripped, near impossible to break… it can hold large amounts of energy and can break with a bang! The grips that hold fabric tend to be hydraulic and have special grip arrangements because of this property. There are 3 types of face of the jaws. Plain, Hatched and Grab each have a specific set of materials that they can be used with, each with singular benefits. The 123-001 holds the sample between two 250mm wide faces, these come together with a clamping force and the test can then be performed. If you're interested in this or other Textile testing, please contact Sylvia Hillier or go here: http://www.testingtextiles.com/